Hurricane-Resilient Development

Developments designed and financed for hurricanes and flooding: site exposure mapped, wind and flood design set early, roofs and openings built right, insurance costs managed and resilience turned into a reason to buy.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Then open the Marketplace in the app, search for Hurricane-Resilient Development, and click Install. It goes into your own files, and works offline from then on.

Before you start: this plan is general information to help you organise your own affairs. It is not legal advice, and following it does not make anyone your lawyer. Rules differ between countries and change often, so check decisions that matter, and anything you sign, with a qualified lawyer or the official authority in the country concerned.

What it installs.

1

Pillar

1

Area

50

Projects

200

Starter tasks

🏢 Real Estate Investing & Development

Hurricane-Resilient Development

Designing and financing developments for hurricanes and flooding: building codes, site levels, roofing and openings, insurance costs and resilience as a selling point.

  1. Hurricane and flood exposure profile for the site
  2. Storm surge and flood zone mapping check
  3. Wind speed design basis agreed with the structural engineer
  4. Building code and wind standard confirmation
  5. Finished floor level and site level strategy
  6. Resilience brief for the design team
  7. Early insurance quotation on the outline design
  8. Resilience cost allowance in the appraisal
  9. Hurricane risk register for the scheme
  10. Resilience check at every design stage
  11. Construction site hurricane season plan
  12. Storm warning site shutdown drill
  13. Roof and openings installation inspections
  14. Drainage and culvert maintenance routine
  15. Insurance renewal and market check cycle
  16. Resilience evidence file for buyers and lenders
  17. Post-storm damage assessment protocol
  18. Pre-season inspection of completed buildings
  19. Owner and occupant hurricane manual
  20. Reading wind load calculations as a developer
  21. How surge, rainfall and river flooding differ
  22. Impact-rated windows and doors explained
  23. Roof failure modes and the load path
  24. Catastrophe insurance terms for developers
  25. Lessons from post-hurricane damage reports
  26. Resilience rating schemes for buildings
  27. Roof system choice for high wind
  28. Shutters versus impact glazing decision
  29. Elevate, floodproof or move the footprint
  30. Backup power and water storage choice
  31. Structural frame choice for wind and water
  32. Value engineering guardrails for resilience items
  33. Contractor selection weighted for storm workmanship
  34. Nature-based defences on the site
  35. Build programme timed around the hurricane season
  36. Dry-in before the season deadline
  37. Pre-season lender and insurer site visit
  38. Recovery after a named storm hits the site
  39. Resilience story in the sales launch
  40. First coastal scheme for a small developer
  41. Retrofitting an acquired building for storms
  42. Condominium scheme storm obligations
  43. Disclosing storm risk to investors
  44. Rebuilding a storm-damaged scheme better
  45. Storm-ready house type for a small builder
  46. Evidence of a resilience premium for valuers
  47. Parametric cover for a portfolio
  48. Climate stress test of the development pipeline
  49. Resilience-linked finance from development lenders
  50. Portfolio hurricane exposure tracker

Where it starts.

Each project arrives with its purpose, milestones and first tasks written out. Here is how the first three read.

Hurricane and flood exposure profile for the site

Before a single drawing is paid for, you need to know which hazards the site actually faces: wind, storm surge, rainfall flooding, river flooding, landslip or all of them. A two-page exposure profile built from public maps, historical storm tracks and a walk of the site after rain tells you whether the land is a sensible buy and what the design will have to carry.

First tasks

  • Search a public historical hurricane track database for storms near the site
  • Download the official flood and surge maps covering the parcel
  • Talk to two neighbours about water levels in the last big storm
  • Write the two-page exposure profile and attach it to the appraisal

Storm surge and flood zone mapping check

Coastal schemes are lost to water far more often than to wind, and flood maps can be years out of date or drawn at a scale that misses your plot. Getting a surveyor's levels tied to the same datum as the official flood and surge maps shows exactly how far the ground sits above or below the expected water level.

First tasks

  • Ask the land surveyor to tie all levels to the datum used by the flood maps
  • Find the surge and flood levels for the site from the official mapping agency
  • Mark the lowest corner of the site and its gap to the flood level
  • Note watercourses or gullies upstream that drain toward the site

Wind speed design basis agreed with the structural engineer

Every roof fixing, window and wall tie on the scheme follows from one number: the design wind speed and the exposure category the engineer chooses. Agreeing that basis in writing at concept stage, with the standard it comes from and any margin you want above the code minimum, stops it being quietly reduced later to save cost.

First tasks

  • Ask the structural engineer for the design wind speed and its source in writing
  • Ask whether a hill, ridge or coastal exposure factor raises the figure
  • Decide with your partners whether to design above the code minimum
  • Issue the one-page wind design basis to every consultant

Make it yours.

Install Hurricane-Resilient Development, then tell Aurum the date you're aiming for. It checks whether the plan fits the weeks you actually have.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Blueprints are general information to help you organise your own work. They are not medical, financial, legal or other professional advice. See the Terms.