Aerospace Engineering Practice

Your approvals and certification basis mapped, a controlled configuration baseline, and the directive, reliability, change board and compliance routines that keep aerospace design and maintenance evidence approvable.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Then open the Marketplace in the app, search for Aerospace Engineering Practice, and click Install. It goes into your own files, and works offline from then on.

Before you start: this plan is general information to help you organise your own work. It does not replace your professional judgement, the rules of your regulator or professional body, your firm's policies, or advice from a qualified lawyer, accountant or other adviser. Where a law, code or standard applies, use the current official version for your country, and get qualified sign-off on regulated or safety-critical work.

What it installs.

1

Pillar

1

Area

50

Projects

203

Starter tasks

🔧 Engineering Practice

Aerospace Engineering Practice

Working in aerospace engineering: design, stress or systems roles, airworthiness and certification evidence, configuration control and maintenance engineering.

  1. Role map across design, production and continued airworthiness
  2. Certification basis of the product you support
  3. Controlled library of airworthiness codes and guidance
  4. Design organisation procedures and signatory limits
  5. Configuration baseline and effectivity map
  6. Type familiarisation by ATA chapter
  7. Approved materials data and allowables sources
  8. Competence record for design signatory authorisation
  9. Hangar and flight line safety induction
  10. Weekly airworthiness directive and service bulletin screening
  11. Monthly fleet reliability review
  12. Configuration control board preparation
  13. Non-conformance and concession disposition log
  14. Technical query register for production and MRO
  15. Occurrence report and safety data review
  16. Deferred defect and MEL watch
  17. Annual maintenance programme amendment cycle
  18. Compliance document status tracker
  19. Regulatory change watch for your product category
  20. Stress reports with clear margins of safety
  21. Fatigue and damage tolerance fundamentals
  22. Development assurance and safety assessment under ARP4754 and ARP4761
  23. Software and airborne electronic hardware assurance basics
  24. Composite structures and damage assessment
  25. Working from the structural repair manual
  26. Weight and balance control
  27. Environmental qualification of airborne equipment
  28. Compliance checklist with means of compliance for a change
  29. Classifying a change or repair as minor or major
  30. Obsolescence plan for an ageing part
  31. Supplemental type certificate or in-house route for a modification
  32. Eliminating a repeat pilot report defect
  33. Corrosion prevention for salt-air island operations
  34. Escalating a maintenance task interval with evidence
  35. Clearer engineering orders and task cards
  36. Authority audit of the design or airworthiness organisation
  37. Witnessing a certification test
  38. Preliminary and critical design review for a subsystem
  39. First article inspection of a new part
  40. Engineering package for a heavy maintenance check
  41. Aircraft records audit for lease return or entry into service
  42. First six months as a stress engineer
  43. From licensed technician to maintenance engineering
  44. Moving into aerospace from another engineering industry
  45. Contract engineer between aerospace programmes
  46. Sole engineer at a small regional operator
  47. Leading a small aerospace engineering team
  48. Spacecraft requirements verification matrix
  49. Unmanned aircraft operational risk assessment
  50. Ageing aircraft and limit of validity programme

Where it starts.

Each project arrives with its purpose, milestones and first tasks written out. Here is how the first three read.

Role map across design, production and continued airworthiness

Aerospace work sits inside approvals: a design organisation, a production organisation, a maintenance organisation and a continuing airworthiness organisation each hold different privileges, and an engineer's signature only counts inside the one they work for. Knowing which approval your team operates under, which authority oversees it and which documents you may sign stops you producing evidence nobody can use.

First tasks

  • Ask your manager which approvals and approval numbers the organisation holds
  • Find the exposition or procedures manual on the company document system
  • List the documents your current role allows you to author, check or approve
  • Draw the one-page map and pin it beside your workstation

Certification basis of the product you support

Every type certificate rests on a certification basis: the airworthiness code at a fixed amendment, plus special conditions, equivalent safety findings and any elected compliance with later amendments. Engineers who design to the latest amendment instead of the one in the basis, or who miss a special condition, create findings late in the programme.

First tasks

  • Download the type certificate data sheet for the product you work on
  • Copy the certification basis amendment levels into your notes
  • Mark the paragraphs that apply to your work package
  • Pair each marked paragraph with its acceptable means of compliance or advisory circular
  • Take your open questions to the airworthiness office

Controlled library of airworthiness codes and guidance

Working from a downloaded PDF of an old amendment is one of the commonest ways to produce non-compliant evidence. A personal index of the codes, guidance material, SAE and RTCA documents and company design manuals you use, each tied to the edition your project is certified against, makes it obvious when the latest copy is not the right copy.

First tasks

  • List every code, guidance document and standard you opened last month
  • Look up the edition each of your projects is certified against
  • Replace personal downloads with links to the controlled library copy
  • Ask the library to order any standard the organisation does not hold

Make it yours.

Install Aerospace Engineering Practice, then tell Aurum the date you're aiming for. It checks whether the plan fits the weeks you actually have.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Blueprints are general information to help you organise your own work. They are not medical, financial, legal or other professional advice. See the Terms.