Caribbean Wind and Seismic Design

A written hazard basis for every Caribbean job, the right code edition for each island, wind, seismic and flood loads you can defend, detailing that survives a hurricane or an earthquake, and checks after the event.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Then open the Marketplace in the app, search for Caribbean Wind and Seismic Design, and click Install. It goes into your own files, and works offline from then on.

Before you start: this plan is general information to help you organise your own work. It does not replace your professional judgement, the rules of your regulator or professional body, your firm's policies, or advice from a qualified lawyer, accountant or other adviser. Where a law, code or standard applies, use the current official version for your country, and get qualified sign-off on regulated or safety-critical work.

What it installs.

1

Pillar

1

Area

50

Projects

200

Starter tasks

🔧 Engineering Practice

Caribbean Wind and Seismic Design

Designing for Caribbean hazards: hurricane wind loads, seismic zones, storm surge and flooding, regional codes and checking designs against the right edition.

  1. Written hazard design basis for each Caribbean job
  2. Governing building code and edition for each island
  3. Regional wind, seismic and flood hazard map library
  4. Wind exposure and topography assessment of the site
  5. Seismic site class from the ground investigation
  6. Design flood and storm surge elevation for a coastal site
  7. Risk category for shelters, hospitals and schools
  8. Verified wind and seismic load spreadsheet
  9. Delegated design of cladding, glazing and roofing for wind
  10. Code edition and amendment watch across islands
  11. Weekly wind and seismic calculation check register
  12. Hurricane season readiness review of active sites
  13. Monthly review of regional earthquake bulletins
  14. Impact rating and product approval file for openings and roofing
  15. Post-season hurricane lessons learned log
  16. Roof anchorage and lateral detail hold point inspections
  17. Building authority query log for hazard design
  18. CPD plan in hurricane and earthquake engineering
  19. Main wind force resisting system pressures by hand
  20. Components and cladding pressures at roof edges and corners
  21. Equivalent lateral force seismic analysis of a regular frame
  22. Response spectrum analysis for irregular buildings
  23. Ductile detailing of reinforced concrete frames
  24. Confined and reinforced masonry for houses and small buildings
  25. Continuous uplift load path in timber and steel roofs
  26. Wind-borne debris protection of openings
  27. Liquefaction and landslide screening with the geotechnical engineer
  28. Flood-resistant construction below the design flood level
  29. Choosing between ASCE 7 and Eurocode approaches
  30. Hazard vulnerability ranking of a school or shelter portfolio
  31. Roof form and pitch comparison for hurricane performance
  32. Removing soft storeys and short columns at concept stage
  33. Wind anchorage of rooftop solar and equipment
  34. Sea level rise allowance for a long-life coastal asset
  35. Seismic isolation or damping option study
  36. Permit submission with wind and seismic calculations
  37. Site shutdown when a hurricane watch is issued
  38. Rapid damage assessment of buildings after a hurricane
  39. Post-earthquake safety evaluation and placarding
  40. Independent peer review of a critical facility design
  41. Graduate engineer's first hurricane and earthquake design
  42. Engineer new to Caribbean hazard design
  43. Standard hazard details for a small practice designing houses
  44. Plan reviewer checking hazard design submissions
  45. Engineer on a post-disaster reconstruction programme
  46. Hazard due diligence for lenders and insurers
  47. Wind tunnel testing or CFD for a tall or unusual structure
  48. Site-specific seismic hazard and response analysis
  49. Performance-based seismic assessment of an existing building
  50. Hurricane and seismic resilience of towers, tanks and utilities

Where it starts.

Each project arrives with its purpose, milestones and first tasks written out. Here is how the first three read.

Written hazard design basis for each Caribbean job

Wind speed, seismic zone, flood level and risk category are the four numbers that size most of a Caribbean structure, and on many jobs they live only in one engineer's spreadsheet. A short hazard design basis, agreed with the client and the architect before any analysis, fixes the code and edition, the hazard values with their sources and the performance expected after a design storm or earthquake.

First tasks

  • Open a hazard design basis for your current job using a one-page outline
  • Record the design wind speed, seismic values and flood level with their sources
  • State the risk category and the post-event performance the client expects
  • Send the basis to the client and architect asking for written agreement

Governing building code and edition for each island

Caribbean territories do not share one code: some have adopted an IBC-based national code, others still reference older CUBiC-derived documents, and some simply require ASCE 7 or a Eurocode approach with local annexes. Knowing which document and which edition the building authority on each island will accept prevents a design being rejected at permit or, worse, approved against a superseded hazard map.

First tasks

  • List every island where you have designed or bid in the last three years
  • Find the enforced building code and edition for each on the authority's website
  • Email the building authority where the edition or local amendments are unclear
  • Save the table in the shared design standards folder with today's date

Regional wind, seismic and flood hazard map library

Hazard maps for the region come from many places: the code annexes, older regional mitigation projects, university seismic research units, national meteorological services and flood mapping by planning agencies. Collecting the current versions in one controlled folder, each with its source and date, stops engineers pulling a map from an old report or a search result.

First tasks

  • Gather every hazard map currently saved in project folders into one place
  • Label each map with its source, edition and linked code
  • Archive superseded maps and write the index sheet
  • Check the map library against the latest code and agency releases @recurring(yearly)

Make it yours.

Install Caribbean Wind and Seismic Design, then tell Aurum the date you're aiming for. It checks whether the plan fits the weeks you actually have.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Blueprints are general information to help you organise your own work. They are not medical, financial, legal or other professional advice. See the Terms.