Chemical and Process Engineering

A working process engineer's area: learning the unit from its PFD, closing mass and energy balances, sizing equipment by hand, watching performance and troubleshooting the plant within its operating envelope.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Then open the Marketplace in the app, search for Chemical and Process Engineering, and click Install. It goes into your own files, and works offline from then on.

Before you start: this plan is general information to help you organise your own work. It does not replace your professional judgement, the rules of your regulator or professional body, your firm's policies, or advice from a qualified lawyer, accountant or other adviser. Where a law, code or standard applies, use the current official version for your country, and get qualified sign-off on regulated or safety-critical work.

What it installs.

1

Pillar

1

Area

50

Projects

200

Starter tasks

🔧 Engineering Practice

Chemical and Process Engineering

Working as a chemical or process engineer: process flow diagrams, mass and energy balances, equipment sizing, plant troubleshooting and operating envelope reviews.

  1. Process engineer's reference and calculation toolkit
  2. Learning your unit from its process flow diagram
  3. P&ID line walk of the first unit
  4. Design heat and material balance versus today
  5. Operating envelope and limits sheet for the unit
  6. Chemical hazard and property file for the unit
  7. Overall mass balance closure on one unit
  8. Energy balance around a furnace or exchanger train
  9. Written process description of the unit
  10. Choosing the unit's key performance indicators
  11. Morning trend and shift log review
  12. Weekly unit performance note
  13. Monthly yield accounting and loss review
  14. Heat exchanger fouling monitoring
  15. Distillation column performance tracking
  16. Catalyst and adsorbent life tracking
  17. Weekly process engineer field walk
  18. Operator query and technical request log
  19. Laboratory sampling plan and data review
  20. Operating envelope excursion log
  21. Utilities consumption tracking
  22. Process engineering technical reading programme
  23. Centrifugal pump hydraulics and NPSH by hand
  24. Shell and tube exchanger rating practice
  25. Two- and three-phase separator sizing
  26. Line sizing and pressure drop for gas, liquid and two-phase
  27. Distillation from McCabe-Thiele to tray hydraulics
  28. Reactor conversion and selectivity from plant data
  29. Control valve sizing and process datasheets
  30. Relief scenarios and relief valve sizing basics
  31. Heat exchanger cleaning interval decision
  32. Unit capacity limits map
  33. Pinch analysis of the unit's heat recovery
  34. Plant troubleshooting case file
  35. Selecting a separation technology for a new duty
  36. Chemical treatment programme review
  37. Steam system and steam trap loss survey
  38. Process design basis for a small plant modification
  39. Plant performance test run
  40. Process worklist for the next shutdown
  41. Catalyst change-out and start-up support
  42. Process support for a restart after a trip
  43. Presenting an improvement case to plant management
  44. First 90 days as a plant process engineer
  45. Moving between design office and operating plant
  46. Out-of-hours process support rota
  47. Process engineering in batch, food or pharmaceutical plants
  48. Column troubleshooting with gamma scans and pressure surveys
  49. Reviewing junior engineers' process calculations
  50. Dynamic behaviour and upset response study

Where it starts.

Each project arrives with its purpose, milestones and first tasks written out. Here is how the first three read.

Process engineer's reference and calculation toolkit

Most early mistakes in process work are unit slips, the wrong pressure basis or a property pulled from an unreliable source. Setting up one trusted kit of steam tables, a physical property handbook, a units converter, the site's standard conditions and a calculation sheet layout means every later calculation starts from the same footing and can be checked by someone else.

First tasks

  • Ask a senior process engineer which property handbook the site trusts
  • Write the site's standard conditions and pressure basis on one page
  • Build a calculation sheet layout with a checker signature field
  • Work three unit conversions and have a colleague check them

Learning your unit from its process flow diagram

A process flow diagram is the shortest honest description of what a unit does: feeds, products, major equipment, stream numbers and the duties that matter. Redrawing it by hand and explaining it aloud to an operator or senior engineer is the fastest way to stop being new on a unit, usually within the first month.

First tasks

  • Pull the latest issued PFD for the unit from document control
  • Redraw the PFD by hand with stream numbers and major equipment
  • Write one line on the duty and limit of each major item
  • Walk a panel operator through your drawing and note their corrections

P&ID line walk of the first unit

Drawings drift from the plant: bypasses get added, valves get locked in different positions, and temporary hoses become permanent. Walking each P&ID in the field with a highlighter, under the site's access rules and with an operator, teaches the plant as built and turns up discrepancies that matter for every later study.

First tasks

  • Print the unit's P&ID set and group the sheets by system
  • Book field time with an operator for the first two sheets
  • Highlight each line as walked and mark every mismatch
  • Send the discrepancy list to document control with tag numbers

Make it yours.

Install Chemical and Process Engineering, then tell Aurum the date you're aiming for. It checks whether the plan fits the weeks you actually have.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Blueprints are general information to help you organise your own work. They are not medical, financial, legal or other professional advice. See the Terms.