Electrical Engineering Practice

The working kit of an electrical engineer: single-line diagrams you trust, load, fault and protection studies, earthing, equipment specifications, energisation and the site safety habits that keep people clear of arc flash.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Then open the Marketplace in the app, search for Electrical Engineering Practice, and click Install. It goes into your own files, and works offline from then on.

Before you start: this plan is general information to help you organise your own work. It does not replace your professional judgement, the rules of your regulator or professional body, your firm's policies, or advice from a qualified lawyer, accountant or other adviser. Where a law, code or standard applies, use the current official version for your country, and get qualified sign-off on regulated or safety-critical work.

What it installs.

1

Pillar

1

Area

50

Projects

200

Starter tasks

🔧 Engineering Practice

Electrical Engineering Practice

Working as an electrical engineer: power distribution, load studies, protection and earthing, motor and switchgear specification, single-line diagrams and site safety.

  1. Electrical standards and reference shelf
  2. Reading and marking up a single-line diagram
  3. Electrical authorisation under the site safety rules
  4. Arc flash and shock boundaries for site visits
  5. Walkdown of the site electrical network against the drawings
  6. Electrical design basis for a new project
  7. Choosing power system study software
  8. Utility interface and fault level data request
  9. Load list and maximum demand estimate
  10. Cable schedule and routing for a project
  11. Protection settings register and audit
  12. Thermographic survey of switchboards and connections
  13. Battery and UPS health checks
  14. Earthing and lightning protection test cycle
  15. Transformer oil analysis and gas trending
  16. Arc flash label and study currency check
  17. Insulation resistance trending for critical motors
  18. Power quality and energy bill review
  19. Standby generator test runs and fuel readiness
  20. Short-circuit calculations by hand to IEC 60909
  21. Cable sizing from first principles
  22. Protection coordination with time-current curves
  23. Motor starting and voltage dip analysis
  24. Earthing system design for step and touch voltage
  25. Hazardous area classification and Ex equipment
  26. Harmonics from variable speed drives
  27. Load flow studies and reactive power
  28. Power transformer specification and bid evaluation
  29. MV switchgear specification
  30. LV motor control centre specification
  31. Power factor correction business case
  32. Replacing obsolete protection relays
  33. Arc flash mitigation for high incident energy boards
  34. Standby generator sizing for essential loads
  35. MV switchboard energisation
  36. Planned substation outage for maintenance
  37. Writing and rehearsing an HV switching programme
  38. Hurricane season electrical readiness
  39. First ninety days as a graduate electrical engineer
  40. Moving from the design office to a site electrical role
  41. Leading electrical installation for a contractor
  42. Distribution network reliability as a utility engineer
  43. Building services electrical design for a commercial building
  44. Sole electrical engineer in a small consultancy
  45. Taking on the site lead electrical engineer role
  46. Full arc flash study for a site
  47. Stability and islanding study for a site with its own generation
  48. Surge protection and insulation coordination
  49. Outdoor substation layout and busbar design
  50. Independent check of another engineer's power system study

Where it starts.

Each project arrives with its purpose, milestones and first tasks written out. Here is how the first three read.

Electrical standards and reference shelf

Most electrical design arguments end at a clause number, so an engineer who cannot find the right edition of IEC 60364, IEC 61439, IEC 60909 or the NEC and NFPA 70E family quickly loses time and credibility. Building a short, current shelf of the standards your projects are actually designed to, plus two good textbooks and the manufacturer guides you use most, means every calculation can cite its source.

First tasks

  • List the standards named in your current project specifications
  • Ask the document controller which editions the company holds
  • Save the main switchgear and relay application guides in one folder
  • Check the reference list for superseded editions @recurring(yearly)

Reading and marking up a single-line diagram

The single-line diagram is the map every electrical decision is made from, and engineers who can read one fluently spot missing protection, wrong ratings and unsafe switching paths in minutes. Working through one real SLD from your site, symbol by symbol and rating by rating, turns it from a picture into a model you can reason about.

First tasks

  • Request the latest SLD revision from document control
  • Annotate voltage, fault level and earthing at each board
  • Trace every breaker and relay to the circuit it protects
  • Review your question list with a senior electrical engineer

Electrical authorisation under the site safety rules

On most industrial sites you cannot switch, isolate or issue permits on electrical equipment until you hold a written authorisation at a defined level, and working beyond it is a disciplinary matter as well as a danger. Knowing exactly what your current level allows, and what training and assessment a higher level needs, keeps you safe and makes you useful on site sooner.

First tasks

  • Read the site electrical safety rules end to end
  • Ask the senior authorised person what your current level covers
  • Book the assessment for a higher authorisation level
  • Confirm your authorisation refresher is still in date @recurring(yearly)

Make it yours.

Install Electrical Engineering Practice, then tell Aurum the date you're aiming for. It checks whether the plan fits the weeks you actually have.

Free · Mac (Apple silicon) and Windows · v1.0.5 · Other platforms

Blueprints are general information to help you organise your own work. They are not medical, financial, legal or other professional advice. See the Terms.