Each project arrives with its purpose, milestones and first tasks written out. Here is how the first three read.
SCADA system architecture and asset inventory
Most SCADA systems grew one site and one server at a time, and few engineers inherit a drawing that shows every server, client, RTU, PLC, switch and radio as it really is. Walking the system and writing it down gives you the map every later change, patch and security decision depends on, and it usually turns up at least one forgotten machine still talking to the control network.
First tasks
- Export the device list from the SCADA configuration and network switches
- Walk the server room and control room recording every device and label
- Draw the architecture from primary server to the furthest field site
- Flag every device you cannot match to a drawing or an owner
Tag database export and naming convention
Tag databases of twenty thousand points nearly always mixes three naming styles, orphaned tags with no field device and duplicates that disagree. Exporting it to a spreadsheet and writing down the naming convention you will hold from now on makes every screen build, historian query and alarm change faster and less error prone.
First tasks
- Export the complete tag database to a spreadsheet
- Filter for tags with no field address, no units or no scaling
- Draft the naming convention and review it with the operations lead
- Compare a fresh tag export against the last one for unexplained changes @recurring(quarterly)
Field communications and protocol map
When a remote site goes grey on the overview, the first question is how its data travels, and the answer is often a chain of serial Modbus, a licensed radio, a cellular router and a protocol gateway that nobody has drawn. A communications map that names every link, protocol, polling rate and failover path turns a two-hour outage hunt into a ten-minute check.
First tasks
- List every communications channel configured in the SCADA server
- Record protocol, transport, polling rate and timeout for each channel
- Find and back up the configuration of every protocol gateway
- Mark each link with no alternative path on the map